MY SPINTRIBE
Getting your number ready…
MY SPINTRIBE
Getting your number ready…
PACE YOUR RACE / SUPPLIED GPX
22 November 2026
Set a finish-time goal to see the speed you need, race checkpoints and fuelling reminders. Power is a solo physics estimate, not a promise.
Set my finish-time goal96.1kilometres
1032metres of smoothed climbing
Freeno login, manual inputs
Centered 11-point arithmetic moving average (five points either side), truncated at track endpoints. Climbing is the sum of positive adjacent smoothed elevation changes within each track. Point spacing varies; this is a reproducible GPS-noise filter, not surveyed elevation. Geometry supplied by Spera.
Choose your route and finish time. See the speed you need, then build a detailed plan. Free, no login.
YOUR GOAL / REQUIRED SPEED
96,1 km. Build the full plan for terrain-aware splits and feed cues.
Full-plan defaults: 83 kg total, 22°C, 60 g carbs/hour. Open the refinements to adjust them. Fitness feasibility is not assessed.
BEFORE YOU ROLL
For this supplied 96.13 km route, a 3 hour 30 minute moving-time goal requires 27.46 km/h on average. A 4 hour moving-time goal requires 24.03 km/h. Moving time excludes stops. For a clock-time finish goal, allow for stops by choosing a shorter moving-time goal. These are target calculations, not other riders' race averages.
This supplied file has approximately 1 032 m of climbing after smoothing, compared with 1 059 m from its raw elevation. We use a centered 11-point arithmetic moving average, shortened at track endpoints, then sum positive elevation changes within each track. This reduces GPS noise; it is not surveyed elevation.
Yes. Your route and finish-time goal determine the required average speed. The power model uses terrain and your entered assumptions without needing FTP. An optional FTP entry adds a comparison, not a guarantee that you can sustain the estimated power.
Yes, where route elevation is available. The model calculates air density from each segment's altitude and your expected temperature. At the same temperature, Johannesburg's higher altitude means lower air density and less aerodynamic drag than at sea level. This is a mechanical adjustment, not an estimate of your body's response to altitude.
This supplied file has no recognised aid-station waypoints. Your feed cues use the carbohydrate rate you enter and the modelled timing; they do not imply that supplies will be available at those locations. Check the organiser's current event information.